The A941B DC Power and Relay Module makes possible the operation
of our A2$ Series DC models from a standard 12VAC 50-60 Hz poser
source. The A941B is open style and mounts conveniently in a panel
using standard 3'' wide mounting track supplied.
The A941B allows easy addition of both time delay and
electro-mechanical relay output into the system. An edge connector is
provided to accept any of our many different function cards. No card
is required for On/Off operation. The relay is plug-in and can be
substituted with either plug-in logic or solid-state AC switch
outputs. A red LED status indicator shows the state of the input.
Hold-downs are provided for the function card and output device.
A maximum of four controls can be powered from a single A941B
Module. Control outputs can be connected in parallel to the input
terminals to create either series or parallel logic. This is possible
because both light and dark operation is available with the control
phase switch.
Power Consumption |
|
Supply |
Load |
Maximum | 200 mA |
Maximum | 4 | A2 control units | 4 retro/prox or 2 sets of through-beam |
|
Voltage |
|
Ripple | 1.5 V | peak-to-peak @200 mA |
|
Input |
Sink | 8 mA |
Internal Supply | 8 VDC |
|
Ambient Operating Temperature |
Minimum | -40 degrees F |
Maximum | 122 degrees F |
|
Shipping Weight | 1 lb |
Length | 6-3/8 in |
Width | 3 in |
Height |
Base | 0-11/16 in |
Overall | 3 in |
|
Parts
Relay (P846)
Options
...T
Compact Delay Options
Open-Collector Transistor (A23...)
Standard Relay
Technology
Five Wire Ac Relay
Compact Series Two Wire Ac
Switching Controllers
Three Wire Transistor Logic
Considerations
11-28VDC
120VAC
Applications
Parallel Logic Dc
Autotron Group, Elwood Corporation Wisconsin, USA. telephone: 1-414-764-7500